DJI Mavic 3 Enterprise Series FAQ

DJI Mavic 3 Enterprise Series FAQ

DJI has recently launched two new exciting products, the DJI Mavic 3 Enterprise (M3E) and the DJI Mavic 3 Enterprise Thermal (M3T).  

What are the highlights of the Mavic 3 Enterprise Series? What's the difference with the consumer Mavic 3?

  • Mavic 3 Enterprise Series include two models: M3E (Mavic 3 Enterprise) and M3T (Mavic 3 Thermal).
  • With RTK module and mechanical shutter, M3E can achieve centimeter-level mapping accuracy, which is a significant improvement compared to decimeter-level accuracy of the consumer Mavic 3 (No RTK and electronic shutter only). In addition, M3E uses DJI Pilot 2 app, which can be used for route planning and mission flight. Compared with the DJI Fly app, which is used to control consumer Mavic 3, Pilot 2 pilot has more enterprise features.
  • M3T integrates 640*512@30Hz thermal camera, which can be used for night patrol and abnormal temperatures detection, suitable for power grid inspection, solar farm inspection, SAR, firefighting, etc.
  • Regarding the camera spec, both M3E & M3T support 56x hybrid zoom, while Mavic 3 supports 28x hybrid zoom. The minimal photo interval of M3E wide camera is improved to 0.7 seconds, which significantly improves the mapping efficiency.
  • Mavic 3 Enterprise Series provide RTK, speaker and support both MSDK and PSDK for 3rd party software and hardware, which can meet the different types of requirements of enterprise users.

 

What are the improvements of DJI Mavic 3 Enterprise compared to DJI Phantom 4 RTK?

  • Longer Endurance and Higher Efficiency: M3E supports maximum 42min flight time (with RTK module), 15m/s flight speed and 0.7s minimum photo interval, while P4R supports maximum 30min flight time, 13m/s flight speed and 2.5s minimum photo interval. So, the M3E can complete over 2 square kilometers 2D mapping area in a single flight (GSD=5cm), which is 2 times that of the P4R. (When the GSD is smaller, the advantage of M3E is greater. when GSD=1cm, the efficiency of M3E is 7 times that of P4R.)
  • Better Photo Quality: The 4/3-inch CMOS sensor of M3E brings better color reproduction and better noise reduction in low light.
  • Improved Flight Safety: M3E integrates Multiple wide-angle vision sensors which provides omnidirectional obstacle sensing. The flight is safer and more reliable.
  • More Stable Video Transmission: M3E incorporates O3 Enterprise video transmission technology, which offers maximum 15km (FCC standard) transmission distance and 1080P low-latency video.
  • The altitude limit is increased from 500 meters to 1500 meters, supports panoramic photography, and more powerful controller.

 

What are the improvements of Mavic 3 Enterprise Thermal compared to Mavic 2 Enterprise Advanced?

  • Longer endurance: M3E supports maximum 45min flight endurance, while M2EA supports maximum 31min flight time. The longer flight time of the M3T can greatly improve the operation efficiency in the inspection scenario.
  • Tele Camera: Compared to the M2EA which integrates wide and infrared camera, the M3E has an additional zoom camera that can be used for long-distance scouting.
  • Improved Flight Safety: M3T integrates Multiple wide-angle vision sensors which provides omnidirectional obstacle sensing. The flight is safer and more reliable.
  • More Stable Video Transmission: M3T incorporates O3 Enterprise video transmission technology, which offers maximum 15km (FCC standard) transmission distance and 1080P low-latency video.
  • Support FH2: Livestreaming, Coordinate synchronization, Media file sharing

 

What is the mapping accuracy of Mavic 3 Enterprise?

  • M3E GCP-free accuracy is about 2 times that of GSD. For example, at 100m flight height, GSD=H/37=2.7cm, accuracy is within 5.4 cm

Which industries are Mavic 3 Enterprise Series suitable for?

  • M3E is suitable for surveying and mapping, power grid inspection, wind farm inspection, etc.
  • M3T is suitable for power grid inspection, solar farm inspection, SAR, firefighting, etc.

Which apps are compatible with Mavic 3 Enterprise Series?

  • DJI Pilot2 and 3rd party app via MSDK.

 Does Mavic 3 Enterprise Series support SDK?

  • Support MSDK, PSDK and Cloud API.

 Comparison between Mavic 3 Enterprise Series, M30 Series and M300 RTK

  • M3E/M3T: Foldable and compact design, easy to carry, entry-level enterprise drone.
  • M30/M30T: 16x optical zoom and LRF, IP55, powerful RC Plus, suitable for customers who have high requirements for the zoom performance, ingress protection and flight control experience.
  • M300: Support mounting H20 series, P1, L1 and variety o 3rd party payloads, suitable for customers who have high requirement for payload.

Products associated to this article

Leica Rugby Bonus

Buy a Rugby 610/620/640/640G with a premium receiver & get a bonus li-ion battery pack

View Promo

ICON SITE EXCAVATOR

SPECIAL OFFER - LIMITED TIME
A simple machine control solution ideal for compact excavators — with a big payoff!

View Promo