Xwatch XW4
Special Purpose Machines
Excavators
Backhoe Loaders
Height Control
Operation is fail safe and fully automatic with function selection never more that two key presses away. All potential machine high points are monitored and appropriate motions controlled. Full power is always available to move away from a limit. Motions are controlled with ramped slow down on approach and soft-stop. There is no machine ‘bounce’, overshoot, or undershoot. An optional chassis sensor can be installed to correct for terrain slope.
Slew Control
Single/dual parallel wall or angular limitation are available. When walls are in use, the front end equipment is also monitored and controlled for limit breach. Limits can be either manually keyed in or set by positioning the machine. If both limits are active, the system will automatically flip to the appropriate display should a hazard approach occur. Set up is simple, quick, and can be protected with an optional access key switch. All settings are retained and will be active on start-up.
| Datasheets | |
|---|---|
| Xwatch XW4 - Datasheet | Product Manuals |
| Xwatch XW4 - Product Manual |
Brand: Xwatch Safety Solutions |
Code: XW04.001
Supplier Code: XW4-MON-HYD-24
Brand: Xwatch Safety Solutions |
Code: XW04.001
Supplier Code: XW4-MON-HYD-24
At a glance
The XW4 monitors a heavy machinery’s height and slew movement. It has been designed to accurately restrict using feather touch proportional hydraulic control a machines height and left/right slew parameters ensuring operator and machine safety, safe/comfortable for the operator and the environment around the machine.Special Purpose Machines
Excavators
Backhoe Loaders
Height ControlOperation is fail safe and fully automatic with function selection never more that two key presses away. All potential machine high points are monitored and appropriate motions controlled. Full power is always available to move away from a limit. Motions are controlled with ramped slow down on approach and soft-stop. There is no machine ‘bounce’, overshoot, or undershoot. An optional chassis sensor can be installed to correct for terrain slope. |
|
|
|
Slew ControlSingle/dual parallel wall or angular limitation are available. When walls are in use, the front end equipment is also monitored and controlled for limit breach. Limits can be either manually keyed in or set by positioning the machine. If both limits are active, the system will automatically flip to the appropriate display should a hazard approach occur. Set up is simple, quick, and can be protected with an optional access key switch. All settings are retained and will be active on start-up. |
