The Vivax-Metrotech vLocPro 2 builds on the features of the original vLoc Pro to enhance productive locating. This represents a totally new generation of Pipe & Cable locator utilizing the latest technology including Dual Core DSP Processing and high performance Air Cored collocated antennas. These technologies give the operator the most accurate results possible in locating underground services giving reduced interference in congested and noisy areas, while still providing a simple to operate instrument.
Operational features Receiver
Signal strength via moving bar graph & numeric values
Peak, Null, Broad peak, sonde modes
Left/right indication arrows
Depth and Current measurement
Current Direction Compass
Gain Level control 140dB
Battery indicator
Frequency range selection 50 Hz to 83 kHz available
Semi auto range control
Configured in 640Hz, 8, 33, 65 and 83 kHz as standard
Automatic filtering of irrelevant signals
Locate pinpointing accuracy less than 5% to 3 metres on undistorted signal
Housing construction and features
Carbon fibre antenna tube
ABS thermoplastic housings
IP54 weather proof housing
-20°C to 50°C operating range
TFT LCD 8.9cm colour VGA Screen
2 x Horizontal 3 x Vertical collocated antennas – Air cored
Up to 4X the battery life of the original vLoc Pro
2 x USB ports for upgrade accessories and logging modes
Operational Features Transmitter
Monochrome Dot matrix display
Output current displayed
Connection method displayed
High Voltage warning
Built in multimeter with Volts Ohms display
Battery condition
Induction mode
Direct connection mode
640Hz, 8, 33, 65, 83 kHz
Other frequencies available upon request
Maximum output 50 volts
Maximum output 1 amp
Frequencies under 45kHz 10 watts
Frequencies over 45kHz 1 watt
Housing construction and features
High Impact Plastic
Modular removable battery packs
Standard packs using 12 D alkaline
Rechargeable Ni-Mh packs (option)
Battery life Alkaline Ni-Mh 1 watt 8 hours or above 5 watt 6 hours or above 10 watt 5 hours or above
3 pin XLR input
Output protected from accidental connection to 240 volts
Direct connection leads & ground stake
Induction clamp
Separate ground lead 10 metres
Operating temps -20°C to 50°C
Brochures
VLOCPRO2-KIT - Brochure
Creating your Account
Ordering this item will place it on Backorder
What does this mean?
If you order an item we do not have in stock it may take a period of time for us to receive the product from our suppliers and ship it to you as explained further below
If we do not currently have an item in stock we will show you in one of the following ways:
ETA: dd/mm/yyyy (From time of order) The product is not currently in stock however our best estimate of the date we are due to receive more stock is indicated by the date shown. This does not guarantee all orders placed will be able to be fulfilled from the stock we are receiving on this date but is the best date we are able to provide as an estimate.
All displayed dates are subject to change without notice. Also note once we receive stock it may take a number of days for this stock to be sent to our customers
On Order The product is on order with a supplier but not currently in stock and we do not have a clear enough date from our supplier as to when the stock is due to arrive. In this situation we cannot therefore provide an estimated availability date to you
No Stock The product is not currently in stock and we do not have this on order with a supplier Our product page will display an estimated lead time if you were to place a no stock item on backorder
