Micasense RedEdge-P Multispectral Camera Kit + DJI Skyport for M300
- Captures both Multispectral and RGB imagery.
- 2cm GSD from 60m altitude.
- IP4X dust and splash proof.
The RedEdge-P is a single camera solution for synchronized capture of calibrated high-resolution multispectral and RGB imagery, with an optimized FOV and capture rate for efficient flights. It seamlessly integrates a high-resolution all-color imager with synchronized multispectral imagers to enable pan-sharpened RGB and multispectral outputs at 2cm GSD from 60m, unlocking extensive analysis capabilities.
INCREASED STORAGE
New professional removable storage standard in CFexpress, enabling over two captures per second and the immediate turnaround time between flights by simply swapping cards.
SYNCHRONIZED CAPTURE OF HIGH-RES RGB AND MULTISPECTRAL
Simultaneous capture of up to six bands, enabling multiple high-resolution outputs such as RGB, crop vigor indices (NDVI, NDRE, etc), and high resolution panchromatic.
TWICE THE SPATIAL RESOLUTION OF THE PREVIOUS REDEDGE
With a high-resolution panchromatic imager, RedEdge-P enables higher-resolution RGB and multispectral outputs - 2cm resolution when flying at 60m. Spot smaller problems or features sooner and make more reliable management decisions across a variety of use cases.
WORKS WITH WHAT YOU HAVE (DRONES, PROCESSING, FLIGHT PLANNING)
This solution is compatible with a wide range of aircraft, from large fixed wings to small multirotors. Flight planning and data processing can be done with industry-standard tools.
RUGGED DESIGN
IP4X rated for dust and splash protection
| Weight | 350 g (RedEdge-P + DLS 2) |
| Dimensions | 8.9 x 7.0 x 6.7 cm |
| External Power | 7.0 V - 25.2 V |
| Power Input | 5.5/7.0/10W (standby, average, peak) |
| Sensor Resolution | 1456 x 1088 (1.6MP per MS band) 2464 x 2056 (5.1MP panchromatic band) |
| Spectral Bands | Blue, green, red, red edge, near-IR (global shutter, narrowband) |
| Wavelength (nm) | Blue (475 nm center, 32 nm bandwidth), green (560 nm center, 27 nm bandwidth), red (668 nm center, 14 nm bandwidth), red edge (717 nm center, 12 nm bandwidth), near-IR (842 nm center, 57 nm bandwidth) |
| RGB Color Output | 5.1 MP (global shutter, aligned with all bands) *with appropriate post-processing |
| Ground Sample Distance (GSD) | 7.7 cm per pixel (per MS band) at 120m (~400 ft) AGL 3.98 cm per pixel (panchromatic band) at 120m (~400 ft) AGL |
| Capture Rate | Up to 3 captures per second raw DNG |
| Interfaces | 3 configurable GPIO: select from trigger input, PPS input, PPS output, and top of frame signals. Host virtual button. USB 2.0 port for WiFi. Serial. 10/100/1000 Ethernet. CF Express for storage |
| Field of View | 50° HFOV x 38° VFOV (MS) 44° HFOV x 38° VFOV (PAN) |
| Storage | CFexpress Card |
- Micasense RedEdge-P Multispectral Camera
- SkyPort connector for DJI Matrice 300
- Lens Cover
- Removable storage CFexpress card
- CRP 2 calibration reflectance panel
- DLS 2 light sensor with integrated GPS
- Cables
- Mounting screws
- Hard carrying case
Micasense Altum-PT Multispectral & Thermal Camera Kit with DJI Skyport for M350
Brand: MicaSense |
Code: 805-00090
Supplier Code: 805-00090
Brand: MicaSense |
Code: 805-00090
Supplier Code: 805-00090
At a glance
- Captures both Multispectral and RGB imagery.
- 2cm GSD from 60m altitude.
- IP4X dust and splash proof.
Micasense Altum-PT Multispectral & Thermal Camera Kit with DJI Skyport for M350
