CHCNAV i83 GNSS Antenna with IMU Tilt Compensation
$9,021.10
HURRY! Only 1 unit left
- RTK GNSS receiver with tilt IMU sensor for base & rover operations.
- 1408-channel multi-band GNSS
- Calibration free IMU for tilt-pole measurements.
- Compatible with GPS, Glonass, BeiDou, Galileo, and QZSS constellations.
- Integrated Wi-Fi, Bluetooth, and NFC modules.
- Long battery life: Operates 18 hours as an RTK network rover.
- Can be used as a base station for DJI Matrice 350 RTK, DJI Phantom 4 RTK, Agras series.
- Can be used as a GNSS rover on a pole (e.g. to pick up ground control points)
| GNSS Performance | |
| GPS | 140 8 channels |
| GLONASS | L1C, A, L2P (Y), L2C, L5 |
| Galileo | L1, L2, L5, L6* |
| BeiDou | E1, E5a, E5b, E6* |
| PPP | B1I, B2I, B3I, B1C, B2a, B2b |
| SBAS | L1, L2, L5, L6* |
| QZSS | B2b-PPP |
| Channels | L1, L5 |
| GNSS Accuracies | |
| Real time kinematics (RTK) |
Horizontal:8 mm+1 ppmRMS Vertical: 15 mm+1 ppmRMS Initialization time:< 10 s Initialization reliability: > 99.9% |
| Post - processing kinematics (PPK) | Horizontal: 3 m m+ 1 p pmR MS Vertical: 5 mm + 1 ppm RMS |
| Post - processing static | Horizontal: 2.5 mm + 0.5 ppm RMS Vertical: 5 mm + 0.5 ppm RMS |
| Code differential | Horizontal: 0.4 m R MS Vertical: 0.8 mRMS |
| Autonomous | Horizontal: 1m RMS Vertical: 1.5m RMS |
| Positioning rate | Up to 10 Hz |
| Time to first fix | Cold Start: <45 s Hot Start: <30 s Signal re acquisition: <2 s |
| Hardware | |
| Size (L x W x H) | Φ16 0.5 m m x 103 m m |
| Weight | 1.73kg |
| Environment | Operating: -40°C to +65°C Storage: -40°C to +85°C |
| Humidity | 100% Condensation |
| Ingress Protection | IP67 waterproof and dustproof, protected from temporary immersion to depth of 1 m |
| Shock | Survive a 2 meter pole drop |
| Tilt Sensor | E-Bubble Levelling |
| Front Panel | 2 LED 0.96" OLED Display |
| Communication | |
| Network Modem | Integrated 4G modem LTE (FDD): B1,B2,B3,B4,B5,B7,B8,B20 DC-HSPA+/HSPA+/HSPA/UMTS: B1, B2, B5, B8 EDGE/GPRS/GSM 850/900/1800/1900 MHz |
| Wi-Fi | 802.11 b/g/n, access point mode |
| Bluetooth | v.4.1 |
| Others | NFC |
| Ports | 1x7-pin LEMO port (external power, R S -232) 1xUHF antenna port (TNC female) |
| UHF Radio | Standard Internal Rx/Tx: 450 - 470 MHz Transmit Power: up to 5 W Protocol: CHC, Transparent, TT450, Link rate: 9,600 bps /1 9,200 b ps Range: Typical 5 km to 8 km, up to 25 km with optimal conditions |
| Data formats | RTCM2.x, RTCM3.x, CMR input / output HCN,HRC,RINEX2.11, 3.02 NMEA0183 output NTRIP Client, NTRIP Caster |
| Data Storage | 8GB Memory |
| Electrical | |
| Power consumption | 12 W (depending on user settings) |
| Li -ion battery capacity | 2 x 7000 mAh, 7.4 V |
| Operating time on internal battery | UHF re ceive / tr ansm it (5 W): 8 h to 12h Static: up to 15h |
| External power input | 9V DC to 28V DC |
| Datasheets | |
|---|---|
| CHCNAV i83 GNSS Antenna with IMU Tilt Compensation - Datasheet |
Brand: CHCNAV |
Code: 8001010239
APN: 9319499265441 |
Supplier Code: 8001010239
Brand: CHCNAV |
Code: 8001010239
APN: 9319499265441 |
Supplier Code: 8001010239
At a glance
- RTK GNSS receiver with tilt IMU sensor for base & rover operations.
- 1408-channel multi-band GNSS
- Calibration free IMU for tilt-pole measurements.
- Compatible with GPS, Glonass, BeiDou, Galileo, and QZSS constellations.
- Integrated Wi-Fi, Bluetooth, and NFC modules.
- Long battery life: Operates 18 hours as an RTK network rover.
- Can be used as a base station for DJI Matrice 350 RTK, DJI Phantom 4 RTK, Agras series.
- Can be used as a GNSS rover on a pole (e.g. to pick up ground control points)
| GNSS Performance | |
| GPS | 140 8 channels |
| GLONASS | L1C, A, L2P (Y), L2C, L5 |
| Galileo | L1, L2, L5, L6* |
| BeiDou | E1, E5a, E5b, E6* |
| PPP | B1I, B2I, B3I, B1C, B2a, B2b |
| SBAS | L1, L2, L5, L6* |
| QZSS | B2b-PPP |
| Channels | L1, L5 |
| GNSS Accuracies | |
| Real time kinematics (RTK) |
Horizontal:8 mm+1 ppmRMS Vertical: 15 mm+1 ppmRMS Initialization time:< 10 s Initialization reliability: > 99.9% |
| Post - processing kinematics (PPK) | Horizontal: 3 m m+ 1 p pmR MS Vertical: 5 mm + 1 ppm RMS |
| Post - processing static | Horizontal: 2.5 mm + 0.5 ppm RMS Vertical: 5 mm + 0.5 ppm RMS |
| Code differential | Horizontal: 0.4 m R MS Vertical: 0.8 mRMS |
| Autonomous | Horizontal: 1m RMS Vertical: 1.5m RMS |
| Positioning rate | Up to 10 Hz |
| Time to first fix | Cold Start: <45 s Hot Start: <30 s Signal re acquisition: <2 s |
| Hardware | |
| Size (L x W x H) | Φ16 0.5 m m x 103 m m |
| Weight | 1.73kg |
| Environment | Operating: -40°C to +65°C Storage: -40°C to +85°C |
| Humidity | 100% Condensation |
| Ingress Protection | IP67 waterproof and dustproof, protected from temporary immersion to depth of 1 m |
| Shock | Survive a 2 meter pole drop |
| Tilt Sensor | E-Bubble Levelling |
| Front Panel | 2 LED 0.96" OLED Display |
| Communication | |
| Network Modem | Integrated 4G modem LTE (FDD): B1,B2,B3,B4,B5,B7,B8,B20 DC-HSPA+/HSPA+/HSPA/UMTS: B1, B2, B5, B8 EDGE/GPRS/GSM 850/900/1800/1900 MHz |
| Wi-Fi | 802.11 b/g/n, access point mode |
| Bluetooth | v.4.1 |
| Others | NFC |
| Ports | 1x7-pin LEMO port (external power, R S -232) 1xUHF antenna port (TNC female) |
| UHF Radio | Standard Internal Rx/Tx: 450 - 470 MHz Transmit Power: up to 5 W Protocol: CHC, Transparent, TT450, Link rate: 9,600 bps /1 9,200 b ps Range: Typical 5 km to 8 km, up to 25 km with optimal conditions |
| Data formats | RTCM2.x, RTCM3.x, CMR input / output HCN,HRC,RINEX2.11, 3.02 NMEA0183 output NTRIP Client, NTRIP Caster |
| Data Storage | 8GB Memory |
| Electrical | |
| Power consumption | 12 W (depending on user settings) |
| Li -ion battery capacity | 2 x 7000 mAh, 7.4 V |
| Operating time on internal battery | UHF re ceive / tr ansm it (5 W): 8 h to 12h Static: up to 15h |
| External power input | 9V DC to 28V DC |
CHCNAV HCE600 Handheld Data Collector / Field Controller with LandStar 8 Software
$2,068.00
Due: 02/02/2025
CHCNAV i83 GNSS Antenna with IMU Tilt Compensation & HCE600 Data Collector Rover Kit
$11,089.10
Due: 02/02/2025
C.R. Kennedy is your national partner for all positioning needs from surveying to machine control, building construction to reality capture and everything in-between. Wherever you are in Australia, C.R. Kennedy are with you, providing an unparalleled level of service and support from industry experts to get the job done safely and efficiently.
Shop Safely and Securely with
@ C.R.Kennedy Geospatial Solutions
© 2024 C.R. KENNEDY. All rights reserved.
ICON SITE EXCAVATOR
SPECIAL OFFER - LIMITED TIME
A simple machine control solution ideal for compact excavators — with a big payoff!
