Smart Tool Digital Level - Module Only incl. bag

Smart Tool Digital Level - Module Only incl. bag

$176.00
  DUE: 31/10/19
  DUE: 31/10/19
PRODUCT ENQUIRY
  • Angle accuracy to 1/10 of a degree
  • The mode button lets you see angles in 3 ways: degrees, % slope or pitch
  • Audible tone allows for hands-free operation
  • Runs off of a standard 9v battery
  • Automatic shut-off after 5 minutes
Brand: SmartLevel    Code: 519752
APN: 0043374923469    Supplier Code: 09437100

If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Features

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

Accuracy

0 and 90

0.05

All Other Angles

0.2

Resolution

-.05 to +.05

0.05 degrees

1 to 90

0.1 degrees

Range

Full 360 degrees

Temperature

Operating

-10C to +50C

Storage

-20C to +65C

Size (LxWxH) cm

60 x 2.54 x 5.92 cm

Weight

0.79kg

Power Supply

9 VDC

OVERVIEW

If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

FEATURES

Features

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

SPECIFICATIONS

Accuracy

0 and 90

0.05

All Other Angles

0.2

Resolution

-.05 to +.05

0.05 degrees

1 to 90

0.1 degrees

Range

Full 360 degrees

Temperature

Operating

-10C to +50C

Storage

-20C to +65C

Size (LxWxH) cm

60 x 2.54 x 5.92 cm

Weight

0.79kg

Power Supply

9 VDC

PROMOTIONS

HOVERMAP DRONE MAPPING SPECIAL

Leading the way in drone autonomy and mapping.

> Learn More

Subscribe and Win

Go in the draw to win a Leica Disto D2 - ENTER HERE

> Learn More

See thru Concrete and Pavement

Pricing subject to stock availability.

> Learn More

Leica Ultra Advanced ex-demo Sale

Limited sale of ex-demo units $8,750 incl. GST

Only 4 units available at this very special price.

> Learn More